
Znaczna poprawa technologii etykiet dzięki Plytex. Prosty i efektywny produkt dla placówek służby zdrowia i pralni.
Zaledwie cztery czynności: tekst drukowany jest na samoprzylepnych etykietach Plytex lub perforowanej taśmie przy użyciu naszego oprogramowania Make Your Mark lub bardziej rozbudowanego oprogramowania BarTender oraz drukarki igłowej typu LQ-690. Dzięki technologii Plytex zaoszczędzisz czas i unikniesz pomyłek.
Stworzona i opatentowana przez Thermopatch warstwa samoprzylepna stosowana na etykietach oferuje dodatkowe możliwości. Etykietę Plytex można pozycjonować przed aplikajcą bez ryzyka przesunięcia lub zwinięcia. Jest to bardzo przydatne, gdy etykieta umieszczana jest na przykład na kołnierzyku lub kieszonce na piersi. Za pomocą Plytex można w prosty sposób pozycjonować chipy RFID przed wgrzewaniem.
Technologia etykietowania Plytex to rozwiązanie wartościowe również w zakresie jakości obsługi klienta. W naszych drukarniach wykonujemy wstępne nadruki na etykietach zmieniając je w produkt identyfikacji wizualnej firmy. Używamy specjalnych farb sitodrukowych całkowicie odpornych na intensywne czyszczenie przemysłowe i maglowanie. Zmiana pozycji etykiety jest również możliwa ilekroć jest to konieczne.
Plytex | ![]() ![]() |
Plytex labels are compliant to Oekotex product class II, under certificate number 1012046 Centexbel.
Plytex® are polyester-cotton textile labels with transparent or white pigmented heat sealable adhesive and a pressure sensitive adhesive coating. Suited for printing barcodes (Q601) and property marking printing the material with an impact printer (dot matrix) like an Epson LQ-690. The labels are on a silicon coated backing fanfolded backing paper with pin feed.
Impact printed heat sealable labels for property marking and barcode printing.
None, when washing instructions of the underlying textile are followed.
Contact your supplier for the available sizes of Plytex® labels.
Ensure that the to be marked textile is free of lint, dust, dirt and no seams, zipper, buttons etc. are near the place where the heat sealing will be performed.
Remark: Good bonding can be prevented in pre-conditioned fabrics applied with a dirt – or water repellent coating.
Ensure that the textile is thick enough to be able to absorb the pressure sensitive adhesive before
marking
204 °C at 14 seconds at 4 – 5 bar pressure on a pneumatic heat seal machine or firm – strong pressure on a manually operated machine. Make sure that the sealing plate of the machine is clean and undamaged.
Keep the Plytex® labels in their original packing, out of direct sunlight, in a cool and dry place. The shelf life of this product is advised to be best before 24 months in optimal storage.
No specific safety measures are required when working with this product.
Technical measures:
We advise to ventilate well at heat sealing activities, since vapors may occur from any textiles being processed.
Personal protection equipment:
This product has not been subjected to classification following the European legislation.
Special hazards designation for humans and environment: Not applicable
This information is based on the current state of our knowledge. It is however, no guarantee of product features and no contractual relationship.
Recommended restrictions apply: This product should not be used for purposes other than specified.
This data sheet has been issued by the quality control department.